Getting started
Resin documentation
How to create or import a project, draw or generate a schematic, lay out and check the board, and export manufacturing files.
Start here
Resin is a browser-based EDA tool. A project holds a schematic, a PCB, a parts list, and the files you export from them. Start with a blank project or import an existing KiCad or Altium design.
Create or import your first project
Create a blank project, or import KiCad or Altium files through the import wizard.
Open the guideAlready have a design? See the supported import formats
Explore the guides
Each guide covers one task: the steps, the result to expect, and what to do when it goes wrong.
Getting started
Create a blank project or import a KiCad or Altium design, then find your way around it.
Schematic design
Move around the schematic editor, draw a schematic by hand, or generate one with the AI chat.
PCB setup and design checks
Push the schematic to a PCB, set up the board, and run ERC and DRC.
BOM, 3D, and manufacturing release
Finish the BOM, check the board in 3D, and generate the fabrication and assembly package.
Your design workflow
The guides follow the order most designs take.
- Draw or generate the schematic
Place symbols and wire them, or describe the circuit in Chat and check what the AI produces.
- Lay out and check the board
Push the schematic to a PCB, set up the board, and clear ERC and DRC.
- Export for manufacturing
Finish the BOM, check the board in 3D, and generate the fabrication and assembly package.